Do Not Disturb With PIN - $2.50 Res/Bus

When activated, this feature blocks calls from anyone who does not enter the PIN (personal identification number) you have chosen. You have control over activating and deactivating the feature and changing the PIN. This feature requires Touch-tone Dialing.
--------------------------------------------------------------------------------

INSTRUCTIONS AND INFORMATION:

Before you use this feature you must choose and program in a PIN.

To Add Or Change Your PIN Number:

1. Pick up the phone and listen for the dial tone.
   
2. Press *78 to activate the feature and then hang up.
   
3. Pick up phone and dial *87.
   
4. Listen for coded dial tone.
   
5. Enter the PIN you have chosen (3-7 digits using numbers 0-9). Wait until you hear three beeps, then hang up.

To Activate:

1. Pick up the phone and listen for the dial tone.
   
2. Press *78.
   
3. Do Not Disturb is now activated - only callers who can enter your PIN will ring through. You must enter the deactivation code to deactivate.

To Deactivate:

1. Pick up the phone and listen for the dial tone.
   
2. Press 79.
   
3. Do Not Disturb is now deactivated and calls will ring through as usual. When this feature is activated, all callers will receive the following message: "We're sorry, the number you have called cannot receive calls at this time. Please call again later."

The caller will NOT be prompted to enter the PIN, however during the message or after the message finishes, any caller who enters the PIN will be able to ring through. Outgoing calls are not effected.